欢迎来到楚域光电官方网站 欢迎来到楚域光电官方网站!
超高STC值 热线电话
您现在的位置:主页 > 产品中心 > 激光标刻 >
精密激光标刻机
来源:未知    日期:2020-06-12    阅读()
精密激光标刻机
精密激光标刻机

主要应用于对光洁度和精细度要求较高的打标任务,几乎所有金属材质和绝大部分非金属材质均可适用。典型应用于陶瓷材料器件,电子元器件,消费电子类产品,汽配,精密工具,医疗器械等领域。

It is mainly used for marking tasks with strict requirements for finish and fineness and can be applied to almost all metal materials and most non-metal materials. Typical applications on ceramic materials and devices, electronic components, consumer electronics products, auto parts, precision tools, medical devices and etc.

精密激光标刻机
 

精密激光标刻系统的光束质量极好,为基模输出,光束聚焦后达到微米级,适用于精密标刻

The laser beam quality of the precision laser marking system is excellent. After focusing, the laser beam reaches the micron level, which is suitable for precision marking

本系统有多款造型和组合方式可选,能够最大程度的满足不同客户的加工需求

Various models and combinations are offered which can meet the processing needs of different customers to the greatest extent.

完美的软硬件配合与选配超高速扫描振镜,可实现标记效率高于普通激光打标机20%

Perfect software and hardware cooperation,and optional ultra-high speed scanning galvanometer can achieve marking efficiency 20% higher than that of ordinary laser marking system

1k到2000K的超宽调频幅度,广泛适应各种材料的精细加工需求

1K to 2000K ultra wide frequency modulation amplitude enable this system to adapt to the needs of fine processing on various materials.

精密激光标刻机
 

设备型号Model No. CY-M20F CY-M30F CY-M50F
激光功率Laser Power 20W 30W 50W
激光波长Wavelength 1064nm
重复频率Frequency 1~2000 kHz
脉冲宽度Pulse Width 0.5~400ns
标记方式Marking Mode 静态或动态标记可选 Stationary or Dynamic
打标范围Marking Scale 可选70*70mm~200*200mm optional
雕刻线速Linear Speed ≤7000mm/s
光斑直径Beam Diameter 0.03~0.05mm
冷却方式Cooling Type 风冷air cooling
供电电源Power Supply 单相AC220V 15A single phase
整机耗电Power Consumption 600~900W
外型尺寸Outer Dimensions 570mmX270mmX200mm
环境要求Work Environment 温度5℃-35℃,湿度5%~75%

上一篇:没有了 下一篇:二氧化碳激光标记切割机

推荐阅读